From the media room of WorkSafe NZ: We have accepted an enforceable undertaking from fibreboard manufacturing company Dongwha New Zealand Limited, following an incident in December 2016 where a...
Tag - safety in mining
Safety in mining’s objective is to remove health and safety risks to mine workers, safety in mining practice may also focus on the reduction of risks to plant (machinery) together with the structure and orebody of the mine. Safety in mining practice should focus on the control of hazards to personnel, plant & equipment and the mine’s core assets.
A worker was holding onto the feeder while trying to clear a blockage in a jaw crusher, when a rock hit his hand and he sustained injury to the hand, requiring medical treatment. The cause of...
Vega’s non-contact, continuous level measurement system Vegapuls 69 continues to prove its versatility in bulk solid measuring, being utilised for the purpose of rock crusher level control, a...
A worker suffered suspected neck injuries when an excavator was loading a dump truck. The mounts on a hydraulic tank on the dump truck failed during the incident. Recommendations to industry: When...
A haul truck breached a windrow at a dump. The position 5 and 6 wheels breached the windrow and the operator only stopped when called by another operator. There was a 20m drop behind the windrow...
An excavator overturned while cleaning up a bench. The bench was 1.5m high. Recommendations to industry: Equipment operators must maintain situational awareness and remain vigilant of the risk of...
An excavator was tramming underground when it hit a light vehicle. The excavator was carrying a hydraulic hammer at the time. As it trammed around a corner, the operator did not see the parked light...
A large pressure bump occurred in a development roadway. Workers on the continuous miner at the time were peppered workers with coal on a continuous miner. A dust storm followed. The rib moved and...
Packaging from a black powder product was found smouldering in the extraction drive by the shotfirer and his assistant. Four cartridges were found in this state. The root cause of packaging being...
While carrying out maintenance, a winder main skip made contact with a davit arm. The arm had been used to prepare for maintenance and when the winder was operated it struck the davit arm...