The National Transport Commission is undertaking research to examine heavy vehicle driver fatigue. The organisation is looking for more heavy vehicle drivers to take part in a research project, in...
Tag - mine magazine
The Executive Director/Chief Inspector leads the technical response for the mine safety compliance and enforcement activities of the Resources Regulator. The role is required to work closely with the...
On the 25 and 26 July, following the 9th National Opal Symposium at Lightning Ridge, the NSW Resources Regulator will be conducting two mine safety information sessions. In addition to focusing on...
Near miss between light vehicle and haul truck The hazards of complex intersection design in open cut mines were highlighted when a light vehicle operator had to take evasive action to prevent a...
Serious injury | SinNot 2018/01069 Summary: A worker’s finger was crushed while installing a 6 metre cable bolt. The worker was removing a 4 metre drill string when the gripper jaws failed to hold...
Serious injury | SinNot 2018/01074 Summary: A tradesman had the fourth finger on his left hand amputated while preparing a mobile crusher for transport with co-workers. One worker was undoing a nut...
Dangerous incident | SinNot 2018/01088 Summary: A service truck rolled while leaving a mine site. At a right-hand bend on a gravel road, the driver swerved, lost control and the truck tipped on its...
High potential incident | SinNot 2018/01095 Summary: During a routine service on a load haul dump vehicle, the machine failed to shut down on low scrubber water. An investigation found the safety...
Serious injury | SinNot 2018/01099 Summary: A rib failure occurred, striking two workers. One worker suffered several fractures on his right femur and a fractured vertebra in his back...
Serious injury | SinNot 2018/01106 Summary: A worker suffered a finger injury that required stitches. While installing support with an air track bolter, a timber jack was lowered and a butterfly...
