Summary: During a pre-operational inspection of a haul truck, an operator rolled an ankle while walking over the truck park-up hump. The worker attended hospital for assessment and treatment...
Author - Mining Editor
Summary: Workers noticed a loss of air pressure from a mobile air compressor and smelled smoke. When they lifted the covers of the compressor, a small flame was found above the starter motor. This...
Summary: While operating a bolting rig on a continuous miner, an operator was sprayed with hydraulic oil. The oil came from the drill chuck area. Oil sprayed onto the operator’s face and mouth. He...
Summary: During the process of trimming and supporting after a shot, the roof came in releasing gas. Workers smelled carbon dioxide (CO2) and the gas monitor on the miner alarmed (1.25% methane)...
Summary: During the process of preparing to grout a nitrogen hole drill casing, a casing fell to the floor. The casing hit a bolter handle, breaking it off. An operator was holding the handle at the...
Summary: Haul trucks were parking in a designated park-up area. The trucks had to be reverse parked into each bay before the operators could disembark. Four trucks were parked successfully by driving...
Summary: While a face loader was loading haul trucks, some rocks rolled out of the back of the bucket resulting in one rock hitting the face loader windscreen on the bottom left hand corner (from the...
Summary: A worker was standing on the walkway of a mobile jaw crusher spotting for an excavator driver who was loading material into a hopper. The worker saw a possible blockage occurring and moved...
Summary: A troop carrier rolled away from a lighting plant park-up area. The vehicle travelled about 200 metres before hitting a centre dividing bund at an intersection and then rolled over. No one...
Summary: A worker was cleaning the under body of an excavator with a 3000 psi high pressure water gun. While repositioning himself, the gun trigger was inadvertently activated, spraying the worker...
